Time-Lapse Video Capture From Network Cameras (Linux)

I have several network cameras watching the outside of my home, monitored by ZoneMinder. I have it set up so that when there is motion detected, it will record for several seconds and send me an email with stills of the incident. While this is nice and gives me a little peace-of-mind, I've always thought about having it record continuously. While it is easy enough to do in ZoneMinder, I didn't really want to use up that much storage recording video and then have to scroll through it to find anything interesting.

The other day I saw a blog post where someone was using a Raspberry Pi and a webcam to do some time-lapse photography, and that sparked an idea that seemed easy enough to do in an afternoon – I could come up with a Python script to grab images from the network cameras at fixed intervals, and write them to a video file in order to generate a time-lapse video!

The first step was to figure out how to build a video file a frame at a time using Python. I had played with the motion-jpeg (mjpeg) format in the past, which pretty much consists of jpeg images streamed one after the other in a file (sometimes with a boundary record between them). I discovered that I could simply capture and append jpeg images to a file and get a video file that could be read by a few video players and converters. Best of all, I could use a simple avconv (formerly ffmpeg) command to convert the mjpeg files to mp4, which is smaller and viewable by almost any player.

Next, I wanted to be able to time-stamp each image so that I could tell when the video was created. For this I stumbled across the Python Imaging Library (PIL) which supports several image formats, including jpeg. Using it, I was able to select a font and write a time-stamp on each image as it was captured before adding it to the mjpeg video file. If it isn't already installed on your system, you can install it using

sudo apt-get install python-imaging
for Debian-based systems or by using the appropriate package manager for your distro.

With all the pieces in place, I developed a little Python script that periodically grabs images from several network cameras and builds a separate mjpeg file for each of them:


# Number of seconds between frames:

# Name of truetype font file to use for timestamps (should be a monospace font!)
FONT_FILENAME = "UbuntuMono-B.ttf"

# Format of timestamp on each frame
TIMESTAMP_FORMAT = "%Y-%m-%d %H:%M:%S"

# Command to batch convert mjpeg to mp4 files:
#  for f in *.mjpeg; do echo $f ; avconv -r 30000/1001 -i "$f" "${f%mjpeg}mp4" 2>/dev/null ; done

import urllib
import sys, time, datetime
import StringIO
import Image, ImageDraw, ImageFont

class Camera:
    def __init__(self, name, url, filename):
        self.name = name
        self.url = url
        self.filename = filename
    def CaptureImage(self):
        camera = urllib.urlopen(self.url)
        image_buffer = StringIO.StringIO()
        image = Image.open(image_buffer)
        return image
    def TimestampImage(self, image):
        draw_buffer = ImageDraw.Draw(image)
        font = ImageFont.truetype(FONT_FILENAME, 16)
        timestamp = datetime.datetime.now()
        stamptext = "{0} - {1}".format(timestamp.strftime(TIMESTAMP_FORMAT), self.name)
        draw_buffer.text((5, 5), stamptext, font=font)

    def SaveImage(self, image):
        with open(self.filename, "a+b") as video_file:
            image.save(video_file, "JPEG")

    def Update(self):
        image = self.CaptureImage()
        print("Captured image from {0} camera to {1}".format(self.name, self.filename))

if __name__ == "__main__":
    cameras = []
    cameras.append(Camera("porch", "http://username:password@", "cam1.mjpeg"))
    cameras.append(Camera("driveway", "http://username:password@", "cam2.mjpeg"))
    cameras.append(Camera("backyard", "http://username:password@", "cam3.mjpeg"))
    cameras.append(Camera("sideyard", "", "cam4.mjpeg"))
    cameras.append(Camera("stairway", "", "cam5.mjpeg"))
    print("Capturing images from {0} cameras every {1} seconds...".format(len(cameras), LAPSE_TIME))
        while (True):
            for camera in cameras:
    except KeyboardInterrupt:
        print("\nExit requested, terminating normally")

Notice the URLs supplied in the Camera constructors. These are specific to each brand of camera, but you can usually find the format with a little Googling. In my program above, the first three cameras are Panasonic BL-C101A network cameras, the last two are a D-Link DCS-930L and a TrendNet TV-IP551W which both have very similar software and URLs.

The font file referenced above needs to be located in the same directory as the Python script, and for best results should be a mono-space font. I just grabbed the Ubuntu Monospace Bold TrueType font file for use here, but you could use anything you like.

You will probably want to launch this as a background task so that it can run for extended periods of time. I have it running on the same server that runs my ZoneMinder setup, so it can run 24-7 collecting time-lapse video. I also wrote a quick little script file that iterates the mjpeg files it finds and converts them to mp4 for easier viewing and archiving:


echo "Removing old files..."
rm -fv *.mp4

echo "Converting files to mp4..."
for f in *.mjpeg ; do
    echo "  Converting $f to $t"
    avconv -r 30000/1001 -i "$f" -q 5 "$t" 2>/dev/null

echo "Done!"

I had a lot of fun learning a few new tricks while working on this, and hopefully you can use it as a starting point for your own time-lapse adventure. If you find this post useful, or have questions about how it works, please leave a comment below.

Read More......
Template design by Amanda @ Blogger Buster